Description
A complete offset optic mount requires both a base and one optic plate. This product listing is only for purchasing spare plates.
The mount can be purchased here.
Standard height (for 1.5" to 1.8" scope mounts):
- Plate 1: Docter, Eotech MRDS, Insight, Meopta, Vortex Venom/Viper, Burris Fastfire III, Crimson Trace CTS 1250/1300 and CT RAD/RAD Pro
- Plate 2: Trijicon RMR, RCR, SRO, Holosun 407C, 507C, 508T, Swampfox Kingslayer, Liberty, Justice
- Plate 3: C-More, Vortex Razor, SIG Romeo 3
- Plate 4: Leupold Delta Point Pro, JPoint, Shield RMS, RMSc, Swampfox Sentinel, SIG Romeo Zero, Romeo-X Compact/Pro, Crimson Trace CT RAD Micro/Micro Pro, Eotech EFLX
- Plate 5: Aimpoint Micro T1/T2/H1/H2, SIG Romeo 4 (not 4B), 5 (not 5X), Holosun HS403 (not A), HS503, HS515, HS530, Vortex Crossfire
- Plate 6: Aimpoint Acro P1/P2, Steiner MPS
- Plate 13: Holosun 509T, HE509-RD
- Plate 15: SIG Romeo 1 and Romeo 1 Pro
- Plate 18: Holosun 407K, 507K (EPS should use plate 2 with adapter included with optic, EPS Carry is not supported)
- Plate 21: Trijicon RMRcc
Tall height (1.9" to 2.2" scope mounts):
- Plate 7: Docter, Eotech MRDS, Insight, Meopta, Vortex Venom/Viper, Burris Fastfire III, Crimson Trace CTS 1250/1300 and CT RAD/RAD Pro
- Plate 8: Trijicon RMR, RCR, SRO, Holosun 407C, 507C, 508T, Swampfox Kingslayer, Liberty, Justice
- Plate 9: C-More, Vortex Razor, SIG Romeo 3
- Plate 10: Leupold Delta Point Pro, JPoint, Shield RMS, RMSc, Swampfox Sentinel, SIG Romeo Zero, Romeo-X Compact/Pro, Crimson Trace CT RAD Micro/Micro Pro, Eotech EFLX
- Plate 11: Aimpoint Micro T1/T2/H1/H2, SIG Romeo 4 (not 4B), 5 (not 5X), Holosun HS403 (not A), HS503, HS515, HS530, Vortex Crossfire
- Plate 12: Aimpoint Acro P1/P2, Steiner MPS
- Plate 14: Holosun 509T, HE509-RD
- Plate 16: SIG Romeo 1 and Romeo 1 Pro
- Plate 17: 1913 Picatinny Rail Adapter (40 degrees only, non adjustable)
- Plate 19: Holosun 407K, 507K (EPS should use plate 8 with adapter included with optic, EPS Carry is not supported)
- Plate 20: Trijicon MRO
- Plate 22: Trijicon RMRcc
Please refer to your optic's manufacturer for correct torque values, but do not exceed 20 inch lbs on the screws that attach the optic to the plate. For instance, Aimpoint specifies just under 12 inch lbs for the Micro T1/T2.
